Long Range Dreams And Sudden Inspirations

Greetings fellow creators! I am back again and it seems as if I'm on a posting streak! It feels so amazing to be dedicating so much time to the Greenhouse and Potting Shed project, or any minis for that matter! I have much to share so let's get started...

When last we left off I was putting the final details on the greenhouse roof. There was a point in its construction that I went away from the instructions and had to engineer some improvements. You see, the original assembly had no bracing at the bottom of the "glass" panels which made the structure extremely flimsy. It was literally being held together with very little glue. The weight of itself worked against itself whenever I'd lift it off the the walls. No Bueno!!! 

So, I beefed it up by adding support pieces at the bottom of each "glass" pane that braced themselves against each of the vertical styles. And, I added support where the two roof halves met at the apex. Here, I glued a long wooden dowel down the center so that the weight was carried by more than just a narrow glue seam where the two angles met. Much stronger! Also, rather than using the two small triangle kit pieces of "glass" designated for the gable end, I cut one solid piece which removed some flexibility and tied the gable to the roof sides much more strongly. And finally, I cut an additional spreader for the roof so that each vertical style tied into one - the kit only had four but there are five "trusses" including the end. The effort really paid off because the roof is totally solid now and I'll feel safe putting it off and on as many times as I need to without worry. I have a sneaking suspicion that this roof is why you don't see many of these completed kits on the internet. It was extremely difficult!

The next challenge was completely self inflicted. You see, I want to be able to remove one of the greenhouse's side walls because I plan to set up a lot of scenes in there. I not only want the ease of loading and removing minis, I want to take photos that look like they are being taken from inside the greenhouse. Because the kit was not made to be constructed that way. I had to engineer a way to make the walls sturdy. Its going to need to stand up to regular roof and wall removals. I added 1/4" x 1/4" beams and affixed them to the potting shed wall where both long greenhouse walls meet it. I also added more bracing to the end wall where the removable wall will butt into it. Adding all this sturdiness also allows me to have the removable wall off but still keep the roof on!

Before I could go farther with the removable wall, I had to get a handle on where some of my hardscape elements were going to go. I looked online for some inspiration and found many real life gardens with elements I wanted to try to incorporate. The first choice was what kind of path I wanted, I settled on something with a bit of whimsy - flagstone pavers made out of egg carton that would wind its way around flower and shrub groupings.

To allow for some depth in my planting beds, I made my egg carton
triple thick by gluing three layers together.

To color my pavers, I used my tried and true kitchen sponge/water/glazing medium/two tone acrylic paint method to give them life. Man was I having fun!!!

Inspiration photo and products used

I underpainted a moss green around the pavers.

Then I used Woodland Scenics Underbrush in light green as moss/clover/weeds between the rocks. I put down Tacky glue where I wanted the greenery, compressed the foamy stuff into the glue, let dry overnight, then rubbed my finger over everything to remove any loose stuff.

Another inspiration photo had a little wooden bridge over a dry creek. How charming! Using a scrap piece of chipboard, some Woodsies Craft Sticks, and a zip tie for "metal" straps, I made a simple bridge.

For the "dry creek", I used Scene A Rama rock and gravel mix. I like that it has various sized rocks to emulate the different sized rock you find in a creek.

The last task to complete before I could justify starting on the actual flower and shrub making was to address how the removable wall would sit firmly in place when I wanted the greenhouse enclosed. For this, I grabbed some of my leftover bricks from the potting shed floor. I wrapped the bottom of the wall in masking tape, set it in place, then glued a row of bricks onto the landscape board. Once they were dry, I painted them a gray that should just fade into the background (if they aren't covered by landscaping).

The wall fits tightly and will stay in place even if the structure is jarred in any way. Hooray! I love it when a long pondered plan finally comes together!!! This greenhouse dream began for me in June of 2023!

And that, my friends, is where I had to stop for the week. Just a few more chores and I can start on the pretty stuff! Yippee!!!

Hope each of you are working toward long term dreams or sudden inspiration! Whatever makes you happy!!!

xo xo,

Jodi