Growing A Cottage Garden Part 3

With all those Geraniums ready to go, I only needed to make a couple other flowers to have what I needed to fill the flower boxes. I didn't want them to compete color wise with the house structure, but instead be a cohesive complement to it. So with all those pinky-peach Geraniums, I decided some nice off white Dahlias would be lovely. For these, I had Bonnie Lavish kits. I needed twenty of them, and luckily, had four kits - each kit makes six. The challenge was that petal sheets from two kits were a perfect off white, and two were white white. I was able to color the petals in my palest yellow ProMarker, Buttercup, then use the blending pen to wash out most of the color. I also brushed some alcohol ink onto the leaf sheets to give them more depth in color. They came out great!

To plant the boxes, I followed the recommendation for planting in pots from the SDK Kits. I also dipped each wire into glue before pushing into the air dry clay. The soil I used is Woodland Scenics Fine Turf Soil.

And here are the flower boxes all planted. I needed to keep the long box pretty low profile, since it will be placed across the back opening, separating the upper and lower floors. To the small flower boxes, I also added pale pink Daisies from Bonnie Lavish kits. I'll get some photos of them installed onto the cottage soon, but don't want to install them yet until I know I am ready to attach the house permanently on the landscape base.

With the flower boxes filled, it was easier to know how much more I'd need to make to fill the planters and pots for the rest of the garden. So next, I decided to tackle the tea blend planter. I don't necessarily have kits for all of the herbs and flowers that make good tea blends, so for these I'm going to have to attempt my own. One of the easiest looking flowers was Chamomile.

I thought I could create a reasonable facsimile using flower punches, yellow Floral Foam, Lycopodium, and floral wire.

I dipped the end of each wire into Fast Grab Tacky Glue to create a nice ball on the end, then let dry.

Once dry, I dipped in regular Elmer's School glue, then into the floral foam. I used my fingers to gently shape and press the foam into the glue, then let dry.

Meanwhile, I punched petals from plain white printer paper, and calyxes from some left over green colored silk paper.

Once the floral foam centers were dry, I assembled. Push one white petal up, almost touching the floral foam. Add a tiny dot of glue, then seat the petal  against the floral foam. Do the same with the next petal, offsetting the petal from the first. Then add the green calyx. I also made a few stems without white petals to simulate flowers in earlier stages of growth. To these, I added and extra calyx petal.

For the leaves, I made a bundle of the flower stems, wrapped lycopodium around them and secured with a wire. I cut off the excess wire, squirted hot glue into a water bottle cap, inserted the bottom of the bundle and held there until the glue was cool and the flowers secured. Then I cut away the bottle cap.

Then I just fluffed, shaped and arranged.

It came out pretty well, and I'm glad I gave it a try! I hope I have as much luck with the rest of the tea blend plants that I need to make for the planter. Luckily, I have kits for the Mints, and some leaf sheets I can use for the Lemon Balm!

Back soon, I hope, with more tea and bee garden goodness!

xo xo,
Jodi

Containers, Fountains and Resins - Oh My!

I made a lot of containers when I went through my whole 3D design spree last November. I had so much fun, and one idea would just sprout another idea and so on until I ended up with a whole lot of them. When I gathered them all up this morning, I sat and stared trying to figure out if I'd use them on Alki Point, and if so, how?

I had originally designed the Enliven square nesting bowl set to be used as a decor item. I quickly used up all of the space inside, so I decided that they could become planters for the outside. Except, then I looked at them, and thought "fountains"! I mixed and matched the bowls with some of the other containers to piece together a couple fountain designs. Since the effect from the 3D printing process leaves a kind of stepped texture, I thought painting them to look like concrete would be fun.

I decided I'd make two different fountains. For the first, I would use the middle and smallest sized square bowls, with the middle sized on top of another square planter, tilted forward so that it's water would run into the smaller bowl. I had to do some caulking and glue to make them appear as though they were one solid piece. After it dries I may have to add more due to shrinkage, and then touch it up with some additional paint. Don't you just love the texture!

I needed something to support the "water" as it cascaded into the smaller bowl, so I just cut a ramp (I guess you'd call it) from a piece of saved plastic packaging (see Russ, I told you I'd use it someday!) and glued that in. I sort of tapered it and I am hoping in the end it will look more realistic.

For the second fountain, I used the large bowl from the set and added the Resplendent Vase to the center as the water spout. I glued in a small piece of clear plastic straw to also give the "water" something to cling to. I am always looking for twigs and rocks and things when we explore our beautiful surroundings, and these tiny rocks are just the right size and variation in color!

To make the "water" I am trying a new product for the first time. It is called Magic Water, and I ordered it from miniatures.com when I had a 20% off coupon. I have to honestly say that for a full price cost of $29.39, I was expecting A LOT more.

It is pretty typical of epoxy/resin as there is a "part A" to be mixed with a "Part B". In the case of this product, it is two parts resin to one part hardener. It was disappointing that for the price, there was no measuring device, cups or stir stick included. I used the big bottle cap to measure both and just cleaned it with a paper towel after each part. I didn't want to put any of it on my measuring spoons. I poured it into one of the disposable Dixie cups I keep around just for this type of occasion. It cautions you to stir it for 5 minutes, then again for another 5 minutes, so I stirred it for a long time. The drying time is 24 hours for about 1/2" in thickness - kind of a long time to me.

I used the stir stick to drizzle the resin into the water spout on the one fountain, then over the ramp on the other, then pinched the Dixie cup into a spout to carefully pour over the rocks, letting it settle in before pouring more. The directions say that you can add Mod Podge over the top to simulate ripples, so I may give that a try tomorrow. If not that, I'll use some 5 minute epoxy and wait till it starts getting thick before I apply it to the waterfall ramp.

I'll get better photos of everything once they are all finished up, and let you know how the Magic Water did.

A note about my experience with other epoxy/resins:

I have used many other epoxy/resin brands and types in the past, so it will be interesting to compare how Magic Water stacks up. On hand, I have Amazing Casting Resin and Amazing Clear Cast. Right off the bat I can tell you they are both over $10 less per kit than the Magic Water, and there is a lot more resin and hardener - at least twice as much. Plus you get several measuring cups and a couple of stirrers.

I made items from these resins for my Starbucks project in 2013, and they are still holding up perfectly. The clear also takes 24 hours to dry, but the regular dries pretty clear and much faster. I have added artist chalk shavings into both to color my castings. It comes out still clear but colored like like soda pop. I have also added acrylic paint, and it comes out about the color quality of a creamsicle - a little milky, which was perfect when I cast gallon whole milk jugs! The white artists chalk worked awesome for 2% milk jugs. Unless the Magic Water unleashes the magic little people to come finish my landscaping for me tonight, I probably will stick to the Amazing brand in the future. To be continued...

Fastidious Floral Fairytale Fireplace

I got a little sidetracked and engrossed on something which was completely unplanned for the fairytale treehouse, and it took all week. Surprise! Surprise! 😜

I had intended to work on getting the balcony assembly installed. In fact, I earnestly started that goal by attaching the flowering vines to the balcony posts. 

Repainted vines from last post.

Flower vines wired to balcony before filler flowers were added.

I even filled in empty areas with supplemental mulberry roses and buds. All was going well...

After mulberry roses filled in.

Until I put it in place for a dry fit. Then I began to ponder whether I needed more vines adorning the panels or if there was enough going on on the posts. What about the structural beams holding the balcony up from the first floor? Maybe just green vines there? Yeah, but despite it being two weeks since I ordered them from the Etsy shop, they hadn't even shipped yet. So, I put that decision aside and carried on with the dry fit instead. 

Dry fit with wall and floor/ceiling to decide placement of fireplace.

I had questions about how the girls' fireplace wall would tie in to the balcony. I had always intended to have a railed portion so that you could look down into the great room, but on which side? The balcony or the back of the treehouse? The wall, being a couple inches short, would need to slide one way or the other. In order to know for sure, I had to look at the actual wall, floor and ceiling in place - not just imagine it. Once I saw it in place, my ideas for the fireplace began to bombard my brain. From past experience I know to seize this kind of creative momentum, lest my ideas float right on out into the nethersphere, never to return. So, the balcony got put aside once again until my vine order and solid ideas for it are at hand.

As per my M.O., I designed the structural pieces of the fireplace in Design Space and cut them with the Cricut Maker. Straight cuts? Cheap chipboard? Yes, please! I covered the kit's wall with scrap paper leftover from the girl's cubbies. Because the kit wall is only 1/8" thick, to give a more realistic chimney feeling, I also made a chimney breast, covering it with another scrap. The fireplace itself has a top, a hearth, a back, double layered front, and sides. To the inside, I added egg carton bricks in a herringbone pattern, just for fun. To detail the fireplace, I had a few packs of resin column fronts with an artichoke frieze. They were the perfect size to flank the firebox. Dresden appliques adorn the front, edges and sides.

While the fireplace assembly was drying, I worked on the fire basket. I made a log holder with firedogs out of kraft card. 

No need to point out anything salacious about the firedogs. Believe me - Russ already has. 🙄 

Resizing things down to 1/12th scale doesn't always translate well.

Double layer firedogs, log basket, bracing.

Layers glued to create thickness and detail.

Bent, assembled and painted.

It's always a perfect fit when you make it custom, lol!

For the fire, I placed a half water bottle cap (it's translucent so the light comes through) under the fire basket/log holder and placed a red LED chip light inside. Like the Log Fire With Glowing Embers tutorial, I surrounded it with glowing "ash". I used hot glue to make Sharpie colored orange/yellow translucent flames to go between the wood logs, but it didn't work out as swell as I'd hoped. I need more practice and patience. At least one of the glue strips worked as intended - it almost appears to be flames due to the other three chip lights under the logs.

At this stage I had the fireplace assembled to the wall, toned down with washes, aged with washes, added trims, put the fire logs in place, added sconces and of course - installed a mirror. But it still wasn't nearly finished yet!

It had to be adorned with flowers. A swag above the mirror, a swag on the mantle and then a vase with buds just popping. The carousel horse is pot metal painted with gold to tie in the mirror frame. Accessories will likely evolve later as I switch my concentration from structure to accessories.

Testing the lights.

With the room lights off.

And at the same time, there were also flower vine valences created for the girls' cubby windows. Fairytales are full of flowers, especially fairytale treehouses!

Alice's Bed Cubby

Goldie's Bed Cubby

But fireplaces need other things, too. Not just pretty things, but useful things. I wanted to make a fireplace screen for the girls and I was fairly certain I could find something to make them from this hoard of mine. Sure enough, I had a set of six half scale chipboard gothic windows from Alpha Stamps. 

I applied Fast Grab Tacky Glue neatly to the back of three of the windows, then placed them on top of some very thin acetate from Cricut Chipboard packaging. Once set, I carefully cut around the edges. Then, to solidify the panes, I filled in the windows with Crystal Clear Gallery Glass.

Once the Gallery Glass was clear and dry, I glued the other three windows on, sandwiching the acetate between them. Then I wrapped them in 1/8" kraft card strips to smooth out the edges.

I painted the frames with a Krylon Gold Leafing Pen, then filled the other side of the glass with more Gallery Glass.

I added some purple and green polka dots with the Sakura Glaze Pens. To attach the window panels together at the correct angle (so they'd fit on the hearth), I sliced 1/8" quarter round in half, making it 45 degrees instead of 90 degrees. Then I glued each half to either side of the center window. When that was dry, I attached each side window. Sorry Betsy - hinges and chipboard do not good bedfellows make. 😊

I also painted a set of fireplace tools and added a basket of logs. The fireplace wall is ready now to help me make my railing side decision.

And it is ready to install into the girl's room.

After flooring, of course!

Unfortunately, my real life house could really use some fastidious focusing. See ya in a couple weeks!

xo xo,

Jodi

P.S.A. On Blogger Issues:

Sometime in mid 2022 the comments I leave for others on their blog posts were mysteriously disappearing, even days after they had been posted - I saw them post! After many searches, I finally found a thread that confirms that I am not (crazy) the only one this is happening to, and a reason for the mystery. Apparently, if your comment disappears from someone's blog, it has to do with their spam filter within the Comments section of their blog. So, it is ultimately up to the blog owner to resolve - nothing you can do.

If you receive comments saying this is happening on your blog, go to your blog dashboard and click on the Comments page. You may see the comment there which has been spontaneously marked as "Spam" for unknown reasons. You can manually approve the comment.

If you don't see the comment, click the question mark symbol at the top right of the page to tell Blogger about the problem. Apparently, they will reset your spam filter which eliminates the problem, at least for a while.

Some others have reported the cause as security settings on specific browsers or a need to clear your cache. Because I have also been unable to backup my blog content since last summer (stalls out and does not save), as well, I suspect that as things are broken in Blogger, they are just no longer being repaired. I hope it is not the case, but I recommend you look into Google Takeout to protect your work. I have mine scheduled to automatically export quarterly and they send my backup files to my email. If ever Blogger ends or starts to charge for hosting, at least we'll have our archives to decide what to do with them.