I had originally designed the Enliven square nesting bowl set to be used as a decor item. I quickly used up all of the space inside, so I decided that they could become planters for the outside. Except, then I looked at them, and thought "fountains"! I mixed and matched the bowls with some of the other containers to piece together a couple fountain designs. Since the effect from the 3D printing process leaves a kind of stepped texture, I thought painting them to look like concrete would be fun.
I decided I'd make two different fountains. For the first, I would use the middle and smallest sized square bowls, with the middle sized on top of another square planter, tilted forward so that it's water would run into the smaller bowl. I had to do some caulking and glue to make them appear as though they were one solid piece. After it dries I may have to add more due to shrinkage, and then touch it up with some additional paint. Don't you just love the texture!
For the second fountain, I used the large bowl from the set and added the Resplendent Vase to the center as the water spout. I glued in a small piece of clear plastic straw to also give the "water" something to cling to. I am always looking for twigs and rocks and things when we explore our beautiful surroundings, and these tiny rocks are just the right size and variation in color!
To make the "water" I am trying a new product for the first time. It is called Magic Water, and I ordered it from miniatures.com when I had a 20% off coupon. I have to honestly say that for a full price cost of $29.39, I was expecting A LOT more.
It is pretty typical of epoxy/resin as there is a "part A" to be mixed with a "Part B". In the case of this product, it is two parts resin to one part hardener. It was disappointing that for the price, there was no measuring device, cups or stir stick included. I used the big bottle cap to measure both and just cleaned it with a paper towel after each part. I didn't want to put any of it on my measuring spoons. I poured it into one of the disposable Dixie cups I keep around just for this type of occasion. It cautions you to stir it for 5 minutes, then again for another 5 minutes, so I stirred it for a long time. The drying time is 24 hours for about 1/2" in thickness - kind of a long time to me.
I used the stir stick to drizzle the resin into the water spout on the one fountain, then over the ramp on the other, then pinched the Dixie cup into a spout to carefully pour over the rocks, letting it settle in before pouring more. The directions say that you can add Mod Podge over the top to simulate ripples, so I may give that a try tomorrow. If not that, I'll use some 5 minute epoxy and wait till it starts getting thick before I apply it to the waterfall ramp.
A note about my experience with other epoxy/resins:
I have used many other epoxy/resin brands and types in the past, so it will be interesting to compare how Magic Water stacks up. On hand, I have Amazing Casting Resin and Amazing Clear Cast. Right off the bat I can tell you they are both over $10 less per kit than the Magic Water, and there is a lot more resin and hardener - at least twice as much. Plus you get several measuring cups and a couple of stirrers.
I made items from these resins for my Starbucks project in 2013, and they are still holding up perfectly. The clear also takes 24 hours to dry, but the regular dries pretty clear and much faster. I have added artist chalk shavings into both to color my castings. It comes out still clear but colored like like soda pop. I have also added acrylic paint, and it comes out about the color quality of a creamsicle - a little milky, which was perfect when I cast gallon whole milk jugs! The white artists chalk worked awesome for 2% milk jugs. Unless the Magic Water unleashes the magic little people to come finish my landscaping for me tonight, I probably will stick to the Amazing brand in the future. To be continued...
