Search My Blog!

Use the Search box below to find keywords that you're looking for quickly and easily!

Search Feature

Monday, November 16, 2015

They're Here!!!


A few weeks ago I posted how I started watching tutorials on Skillshare. That lead me to a 3D iterating software called Tinkercad. I started playing around with making modern 3D miniature stuff for the Alki Point project. That lead me to upload about 50 different designs to Shapeways. And that lead me to printing them. The above photo is the bulk of my designs, although I have several more either being printed now or that I am saving up to order. I know that I am behind the curve by a couple years with this stuff, but I say better late than never! It's just so exciting to finally get to see these little gems in real life!

My photos are taken with my phone so are not the best, and these are the raw Strong, White and Flexable prints. I am still deciding how I am going to finish each piece.

Afterglow Lamp Base - Cost $5.59. Shade Cost $5.51. I love the "stepping" from the printing. It gives it a pottery or natural fiber look and feel.

Shown without Shade to illustrate how bulb and socket fit perfectly.

Channel exit for the cord. I made six different lamp styles. All are designed with the bulbs and wiring in mind.

Persuasion Bedside Table. It has non opening drawers on both sides. Cost on this one is expensive (IMO) - $36.11

Forethought Headboard. I'll make it into a platform bed for the Alki Point. I made three different headboard styles. This is the only one I have had printed, so far. Cost $32.98

Enliven Undermount Kitchen Double Sink Cost $13.31. Faucet sold separately, cost $2.13

Enliven Square Nesting Bowls Cost $12.04

Large Coastlight Modern Planters. Cost $18.86

Steadfast Shelf Sized Vase Set. Cost $5.83

Exhilarate Back and Side Tiled Shower Walls. 1/16" grove can be grouted for contrast. 4" x 7" Back wall $22.78, 3" x 7" side wall $15.85. Shower pan is made to fit and is 4" x 3" x 1/8" and costs $12.14. Shower unit with mixer and rain head costs $4.89. Wall mounted low profile toilet costs $11.14. I'll get better "in use" photos once they go into my project.

Exhilarate bathroom accessories include: Sink $8.28, Faucet $2.22, Trash Can & Soap Pump Set $6.57, Towel Bar, Towel Holder, TP holder and 3 Hooks Set $11.66. 


I also made pendant light shades for the kitchen and bathroom that accommodate standard 12 volt sized bulb and socket sets. Two different styles of modern cabinet hardware, modern door handles, wall art pieces, a brunch set and subway tile kitchen side and back splashes. Those are in production now, so keep your fingers crossed with me!

If you want to give 3D designing and printing a shot, I'll be happy to answer questions or help in any way I can! All you need is an idea, some measurements to convert to scale, and a willingness to spend a little time and money. Believe me - if you love to make, you'll love this process!

12 comments:

  1. Wow, that's a cool haul. Bathroom accesories are always in short supply. You're making me want to try this 3D malarky. =0)

    ReplyDelete
    Replies
    1. Oh Pepper you really should! With your eye for design, and your experience with the laser software, you would be brilliant at it! Do it! Do it! Then share them with us!!!

      Delete
  2. Wow Jodi, you are still ahead of me! I'm still messing around with plastic and wood bits I have in my stash.

    ReplyDelete
    Replies
    1. Me too! I have overflowing junk drawers and everything that breaks around here gets taken apart for mini parts! Anything that will work to make things more realistic, right!!! But ahead? Nope. I am still deeply within the learning curve!

      Delete
  3. They're great: you must be very proud!

    ReplyDelete
    Replies
    1. I really, really am! I can't believe I did this! It's just so great to do something good now and then. I've been feeling a little useless lately, so getting these really lifted my spirits!
      I'm sending a barrage of positive wishes your way that resolutions will come on the HBS Creatin' Contest build! Don't give up! It's going to be A-W-E-S-O-M-E!!!

      Delete
  4. These are really great, well done. I tried using Tinkercad once and was hopeless.
    Are you going to put your bathroom items in your Shapeways shop soon? I'd love to put them in my bathroom please!
    Alice

    ReplyDelete
    Replies
    1. Thank you so much, Alice! I am so tickled that you want to use the bathroom stuff! I'll make the items public by the weekend, then I'll post you the link so that you can order! You just made my day! Thanks again!!!

      Delete
    2. No need to post the link! ;-)
      Can't wait for it to arrive.
      Alice

      Delete
    3. Oh this is so awesome, Alice! Thank you so much for being my first customer! I hope you love everything, and that you share photos of your project! Yippee!!! :0)))))))))

      Delete
    4. I just visited your Shapeways store...Wow! You have designed some awesome stuff! Nice work!

      Delete
    5. Thanks so much! I have a million more ideas half done or in my head, but never enough time to do all that I want in the mini world! I bet you can relate to that! More to come, hopefully!

      Delete

Note: Only a member of this blog may post a comment.